Most important actions when loosing your buddy

The buddy system

As recreational divers we learned it is advised to always dive with a buddy. Diving with together  makes diving more fun, safer and is in some countries even a legal requirement. The idea behind it is based on the fact that with two it is easier and less stressful to manage difficult situations or emergencies during the dive. We also learned the correct functioning of the buddy system is a mutual responsibility. Despite our training, incidents of divers becoming separated are not unusual. Whether consciously or by accident, divers can end up alone underwater during various phases of a dive and sometimes it results in potentially dangerous situations. Buddy team while diving

The buddy system described

"The buddy system is the situation which occurs when two divers of similar interest and equal experience and ability share a dive, continuously monitoring each other throughout the entry, the dive and the exit, and remaining within such distance that they could render immediate assistance to each other if required." —  Definition by Bob Halstead, Line dancing and the buddy system From the definition we learn that the divers within a buddy team share similar experience, interest and skills and they monitor each other throughout the dive. When an emergency occurs they are ready to help each other in order to avoid major issue. A good team agrees on a dive planning, roles during the dive, signals to be used and a realistic objective prior to the dive. Each members familiarizes with and checks his partners dive equipment in order to be able to deal with unforeseen events such as an out-of-air scenario. When diving in a group, the group leader should make sure all divers are aware of their buddy and that the group dive plan matches the plans of the individual buddy teams. It is good practice for a dive leader to re-emphasis each diver's responsibility for his buddy team.

Why does it go wrong?

Divers become separated for many reasons. Divers are often dealing with things that absorb their attention, and as a result fail to properly monitor each other. When divers are only focused on their underwater task like underwater photography, a separation from their buddy system is likely. Despite a good agreement prior to the dive, environmental conditions, visibility, equipment problems and diver attitude can all lead to separated buddies.

Buddy Separation Procedure

Stop, Think and Act

Stop swimming and remain where you are. Panic is your worst adviser. Look around for about 1 minute to see if you can find your buddy. Do this by rotating 360° slowly. Things to look for are bubbles (remember, only humans make bubbles under water), unusual colours under water (yellow fins, dive lights, ...). While doing your search, make sure your buddy can see you. Slowly moving your own diving torch up and down will make you more visible for your partner. Also making a sound (banging your knife on your tank for example) will give him some idea of direction.

Ascend, Safety Stop, Surface.

After you spend a minute of looking for your buddy, your next step is to ascend slowly to the depth of about 5m. When you reach the 5m, deploy your surface marker buoy (SMB) to help your buddy who may already be at the surface know where you are while doing your safety stop. If you do not have an SMB (which should not be the case as an SMB is a standard equipment for each diver and in some coutries enforced by law) you might consider skipping your safety stop. Also during your safety stop, keep looking out for your buddy doing slow 360° surveys.

Surface – Bubbles

When you reach the surface, look for nearby bubbles and look below you. Call out to your buddy several times. If you and your buddy had a dive plan, your buddy will be doing the same procedure as you and will appear at the surface close to where you are. If water conditions are not favorable return to the dive boat and report your missing buddy.

Return to the dive boat or shore.

In your dive plan with your buddy, you would know how long to wait at the surface, if the time exceeds that limit (it should only be a couple of minutes), make your way back to the dive boat and report your buddy as missing.

How to prevent buddy separation?

The buddy system is important in recreational diving and when it fails risks are imminent. Following guidelines can help to avoid losing your buddy:
  • Include separation risks when planning dives, and make certain that the dive objective, the used equipment and the dive conditions do not increase the risk of separation.
  • Remember the dive begins once you step in the water. As such you both go down together!
  • When diving in a group, don’t assume that everyone is looking out for each another. Each diver should have a buddy and conscientiously monitor that person.
  • Avoid dive plans that are inherent in buddies to separate. In case of a Search and Recovery for example, make sure buddies can communicate using a line when distance between them increases.
  • Distraction leads to separation. In case it's part of the dive objective (e.g. one is doing underwater photography) the non-acting buddy will stay in close contact.
  • When one diver leads and the other follows, the “lead” diver should never assume that the “follower” is following. Maintain visual or body contact throughout the dive.
  • Don’t assume the dive has ended once you reach the safety stop. It doesn’t end until all divers are out of the water.
 

Duiken in Gran Canaria

Posted on by Joris De Witte

Duiken in Gran Canaria – Ontdek de Onderwaterwereld in het Zuiden van het Eiland Gran Canaria, een van de prachtige Canarische Eilanden, staat bekend om zijn betoverende landschappen en zonovergoten stranden. Het zuiden van het eiland kent dan ook 360 dagen zon per jaar. Kerst vieren op het strand met 26°C is geen uitzondeling. Wat […]